EasyManua.ls Logo

Minolta PS7000 - Page 44

Minolta PS7000
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Image acquisition screen
3-10
PS7000 Twain Driver
Chapter 3
6. Scan Mode: Select [Spread] (scanning both pages), [Single] (scanning
either right or left page only), or [Book Split] (scanning right
and left pages separately).
Refer to “7. Page key” on page 2-8 for details.
7. Output: Selects the mode (Text or Photo).
Add a grayscale memory (option).
Selection is available from among 4 choices: Binary (Text),
Binary (Photo), Grayscale (Text) and Grayscale (Photo).
8. Brightness: Select [Auto] or [Manual].
Brightness is adjusted manually when [Manual] is selected.
Brightness is adjusted automatically according to the
original when [Auto] is selected, however, further fine
adjustment is also available.
Refer to “Adjusting exposure for scanning” on page 5-36 for
details.
9. Scan buttons: These are the same as the start buttons on the Scanner.
Click the [Spread Scan] button to read both pages of the
book on the table. This button is effective when Scan Mode
is set to [Spread] or [Book Split].
Click the [Right Scan] or [Left Scan] to read only right or
left page of the book on the table. This button is effective
only when Scan Mode is set to [Single].
10. Book / Sheet: Set the type (shape) of the original.
When [Sheet] is selected, the height of the original can be
adjusted.
Refer to “Book/Sheet modes” on page 5-10 for details.
11. Frame Masking: Objects outside the original are erased to prevent a
shadowed (black) frame being created in the image, i.e.
when the paper selection is larger than the original.
Refer to “Frame Masking (Masking)” on page 5-32 for
details.
12. Finger Masking: The image of the fingers holding the original is removed
from the scanned image. This function is effective when
[Frame Masking] is selected.
Refer to “Finger Masking (Fing Mask)” on page 5-33 for
details.
13. Centering: Any shift away from the center of the original is corrected
and the scanned image is placed in the center of the screen.
This function is effective when [Frame Masking] is selected.
Refer to “Centering (Centerin)” on page 5-35 for details.

Table of Contents

Related product manuals