18 19
FOCUS HOLD
Subjects outside the focus frame may not be in
focus. Use focus hold to ensure accurate
focusing.
1.Place the focus frame on your
subject.
2.Press and hold the shutter-release
button partway down until the green
focus lamp glows.
3.Without lifting your finger, recompose
the picture and press the shutter-
release button all the way down to
take the picture.
• Lift your finger from the shutter-release button
to cancel focus hold.
9222-2446-11 MM A804 3/4/98 1:06 PM Page 18
To Next Page
Loading...
