10 11
LOADING THE FILM
Use only 35mm, DX-coded film rated ISO 25 to
3200.
• ISO 400 film is recommended for best results.
• Always load and unload film in subdued light.
• Do not use Polaroid instant 35mm film. Winding
problems may occur.
1.Press the main switch to turn the
camera on. Slide the back-cover
release down to open the back cover,
then place the film cartridge into the
film chamber.
2.Extend the film tip to the "FILM TIP"
mark, making sure it lays flat.
3.Close the back cover.
• The film automatically advances to the first
frame and appears in the data panel.
If the film has been loaded improperly, will
blink in the data panel and the shutter will
remain locked. Open the back cover and
repeat the loading procedure.
9222-2446-11 MM A804 3/4/98 1:06 PM Page 10
To Next Page
Loading...
