8 9
CAMERA STRAPINSERTING THE BATTERY
Attach the strap as shown.
Your camera uses one 3-volt CR123A or
DL123A lithium battery to supply power for all
camera operations.
1.Open the battery-chamber door using
a coin or similar object.
2.Insert the battery according the + and
– marks inside the battery chamber,
then snap the door closed.
• Quartz Date model: The date and time must
be reset (p. 42).
LOW-BATTERY SYMBOL
Power is sufficient, but the
battery will have to be replaced
soon.
Replace the battery. The shutter
will lock until the battery is
replaced.
9222-2446-11 MM A804 3/4/98 1:06 PM Page 8
To Next Page
Loading...
