12 13
FULL-AUTO OPERATION
1.Press the main switch to turn the
camera on.
• Auto Power Off: To conserve power, the
camera automatically turns off if it is not
operated for more than 8 minutes.
2.Hold the camera steady, making sure
your fingers do not cover the flash.
• For vertically framed pictures, hold the
camera so the flash is on top.
3.Look through the viewfinder and push
the zoom lever toward W (wide angle)
to zoom out or toward T (telephoto) to
zoom in.
4.Place the focus frame on a detailed
part of the subject and press the
shutter-release button partway down.
• Your subject’s face or a vertical edge make
the best focus targets.
• The AF illuminator (flash) will fire in low light
to determine focus distance.
Continued on next page.
9222-2446-11 MM A804 3/4/98 1:06 PM Page 12
To Next Page
Loading...
