Expand your camera’s storage by using SD,
SDHC or SDXC memory cards.
1. Unlock and open the Battery/memory
card compartment at the bottom of the
camera.
2. Insert the SD/SDHC/SDXC card into the
memory card slot with the metallic part
facing the back side of the camera.
3. Push the SD/SDHC/SDXC card into the
memory slot until it clicks into place.
4. Close and lock the Battery/memory card
compartment.
To remove the SD/SDHC/SDXC card
5. Unlock and open the battery/memory
card compartment.
6. Gently push the card until it pops out.
7. Pull out the card carefully.
Windows 2000/XP does not support SDXC card (exFAT format).
But in Windows XP (Service Pack 2 or 3), you can download exFAT
patch update to support SDXC card.
To use the SDXC card with Mac OS, the OS version should be 10.5
or higher.
The memory card that is not inserted correctly may cause damage
to the camera. Please be careful when inserting the memory card.
To prevent children from swallowing the memory card, please
keep the memory card out of reach of children.
To Next Page
Loading...
Need help?
General
