20
Initial Settings
When you turn on your camera for the first time, you will be asked to do the initial
settings of your camera. First is the setup of language menu. Specify in which
language menus and messages are to be displayed on the LCD monitor.
Setting the Language
1. Press , , or to move through the selection.
2. Select a language, and then press OK to apply.
Setting the Date & Time
1. Press or to move through the selection.
2. Press or keys to change the value for the date and time.
3. Press OK to apply.
4. If necessary, press to close the menu.
Now, you are ready to start taking images and videos.
Holding down or keys to change the values continuously.
Modes
Your camera has three modes:
Record Mode
This is the default mode while you turn on the camera every time. You are
able to take images in this mode.
Playback mode
Press the Playback button after the camera is turned on to view and
edit captured images or playback videos. The recording of voice memo
attached to images is available in this mode.
Movie mode
When the camera is power on, press Movie button to start/stop
recording video in this mode.
To Next Page
Loading...
