What to do if Minuteman UPS warning light is on and beeping?
If the Warning / Fault LED is illuminated and the alarm is sounding 1-beep every 0.5 seconds, your Minuteman UPS may be overloaded. Check the specifications and remove part of the load. If the UPS shuts down because of an Overload, remove part of the load and then press the On/Off button to turn the UPS on.
Why is my Minuteman EN550 UPS beeping 3 times every 5 minutes?
If the Warning / Fault LED is illuminated and the alarm is sounding 3-beeps every 5 minutes, check the battery connections of your Minuteman UPS. Also, charge the batteries for 8 hours and retest. If the problem persists, consider replacing the batteries.
What to do if my Minuteman UPS operates in battery mode with AC power?
If your Minuteman UPS is operating on battery even when AC power is available, try resetting the input circuit breaker by pressing the plunger back in. If the circuit breaker trips again after restarting the UPS, consider reducing the load on the UPS.
What to do if Minuteman UPS has AC normal LED on but no output?
If the AC normal LED is illuminated on your Minuteman UPS, but there is no output, disconnect the computer cable from the UPS and press the On/Off button. If the UPS then works normally, the software had control of the UPS.
How to improve Minuteman EN550 runtime?
If your Minuteman UPS does not provide the expected runtime, charge the batteries for 8 hours and retest. If the runtime is still less than expected, the batteries may need to be replaced.
What does low battery warning mean on Minuteman EN550?
If your Minuteman UPS shows a low battery warning, it means the UPS's battery reserve is low. This condition will continue until AC power returns or the UPS shuts down from battery exhaustion.
What to do if Minuteman UPS fault light is on and alarm is continuous?
The UPS has an internal problem. Call for service.
Essential safety warnings and installation precautions for UPS operation and handling.
Guidelines for UPS placement and connecting the internal battery module.
Guide to diagnosing and resolving typical UPS problems and error codes.
Detailed instructions for safely replacing the internal UPS battery module.
Essential safety warnings and installation precautions for UPS operation and handling.
Guidelines for UPS placement and connecting the internal battery module.
Guide to diagnosing and resolving typical UPS problems and error codes.
Detailed instructions for safely replacing the internal UPS battery module.
To Next Page
General