How to improve Minuteman Enspire UPS runtime?
If your Minuteman UPS does not provide the expected runtime, charge the batteries for 8 hours and retest. If the runtime is still less than expected, the batteries may need to be replaced.
What does low battery warning mean on Minuteman UPS?
If your Minuteman UPS shows a low battery warning, it means the UPS's battery reserve is low. This condition will continue until AC power returns or the UPS shuts down from battery exhaustion.
What to do if Minuteman Enspire fault light is on and alarm is continuous?
General| Topology | Line Interactive |
|---|---|
| Input Voltage | 120VAC |
| Output Voltage | 120VAC |
| Communication Port | USB |
| Form Factor | Tower |
| Waveform | Simulated Sine Wave |
| Display | LED indicators |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity | 0-95% non-condensing |
| Frequency | 50/60Hz |
| Output Frequency | 60 Hz |
| Outlets | 6 NEMA 5-15R |
| Battery Type | Sealed Lead Acid |
| Backup Time | Varies by load |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Transfer Time | 4-6 ms |
| Storage Temperature | 14°F to 113°F (-10°C to 45°C) |
Key safety guidelines for installation and maintenance of the UPS.
Explanation of symbols used in the manual for safety alerts.
Critical safety advice regarding electrical connections and potential shocks.
Information on equipment compliance with FCC rules and potential radio interference.
Procedure for inspecting the UPS upon arrival and handling shipping damage.
Safety warning regarding handling of damaged batteries, including Pb symbol.
Details on the types and functions of output power receptacles.
Explanation of the status indicated by the Low Battery/Overload/Fault and On Utility/On Battery LEDs.
Description of RJ11/45 and RJ45 ports for phone/fax/modem and USB connectivity.
Recommended environmental conditions for optimal UPS operation and longevity.
Step-by-step instructions for securely mounting the UPS on a wall.
Procedure for connecting the internal UPS batteries, requiring qualified personnel.
Guidance on connecting devices to the UPS output receptacles.
Instructions for safely connecting the UPS to the main power supply.
Information on how the UPS battery is charged and recommended charging times.
Optional connection for monitoring and control via USB.
Optional connection for protecting phone, fax, or modem lines.
Explanation of the UPS's function in protecting equipment from power anomalies.
Instructions for powering the UPS on and off using the On/Off button.
Details on using the USB port for computer connectivity and software.
Information about the included software for monitoring UPS performance.
Description of audible alarms and LED indicators for various UPS conditions.
Common problems, their possible causes, and recommended solutions.
Critical safety warnings and precautions before attempting battery replacement.
Details on battery types, ratings, recharge, and expected lifespan.
Step-by-step guide for safely removing and installing a new UPS battery.
How to get assistance from the dealer or technical support department.
Guidelines for packing the UPS for return shipment and required documentation.
Details on power capacity, input, and output parameters of the UPS.
Information on the physical size and weight of the UPS for shipping and installation.
Details on safety approvals and EMC standards met by the UPS.
Details on what the warranty covers, duration, and conditions for voiding it.
Information on warranty limitations, liability disclaimers, and available remedies.
Statement regarding the product's compliance with the Restriction of Hazardous Substances Directive.
To Next Page
