To Next Page
G
ggrahamJul 28, 2025
How to clear Weak/Bad Battery Alarm on Minuteman PRO1500RT?
- AAndrew MoranJul 28, 2025
To clear the Weak/Bad Battery Alarm on your Minuteman UPS after replacing the battery module, initiate a self-test.
How to clear Weak/Bad Battery Alarm on Minuteman PRO1500RT?
To clear the Weak/Bad Battery Alarm on your Minuteman UPS after replacing the battery module, initiate a self-test.
General| Power Rating | 1500 VA |
|---|---|
| Wattage | 900 W |
| Input Voltage | 120 V |
| Output Voltage | 120 V |
| Battery Type | Sealed Lead Acid |
| Form Factor | Tower |
| Number of Outlets | 8 |
| USB Port | Yes |
| Frequency | 50/60 Hz |
| Waveform | Sine wave |
| Typical Recharge Time | 8 hours |
| Communication Ports | USB, Serial |
| Warranty | 3 years |
| Input Plug | NEMA 5-15P |
| Operating Temperature | 0-40°C (32-104°F) |
| Storage Temperature | 32°F to 113°F |
| Humidity | 0% to 95% non-condensing |
Critical safety guidelines to follow before installing and operating the UPS for maximum safety and performance.
Provides a table to help diagnose and resolve common UPS operational problems.
Critical warnings and cautions before servicing or replacing UPS batteries.
Step-by-step instructions for safely replacing the UPS batteries without powering down.
Steps for troubleshooting and contacting technical support, including required information.
Procedure for packing and returning the UPS for factory service, including RMA number requirements.
Detailed technical specifications for the UPS, including input, output, and battery system parameters.
