SNMP-NV6
Page 5
1. Overview
SNMP-NV6 card is an interface between the UPS and the network. It can obtain the
information from a UPS and issue commands to it. SNMP-NV6 card supports two kinds of
protocols – SNMP and HTTP for user access. Through the SNMP NMS and Web Browser,
the user can setup the SNMP-NV6 card obtain information from the UPS and issue
commands to UPS.
SNMP-NV6 card also provides shutdown software that operates with various Operating
Systems that can link to the SNMP-NV6 card automatically through the network and
communicate with it via SNMP protocol. The shutdown software retrieves the UPS
information from SNMP-NV6 card and based on this information can start the shutdown
process in order to prevent the abnormal shutdown of the host or server due to power events.
1.1 Features
• UPS network management:
Allows remote management of a UPS from any workstation through the Internet or
Intranet.
• UPS remote monitor via SNMP & HTTP:
Allows remote monitoring of a UPS via SNMP NMS together with the UPS MIB
(Management Information Base) files or via a Web Browser.
• UPS and system configuration from any client (password protected):
Set UPS and system parameters from a Web Browser.
• Records event logs & monitored data:
Provides history data and event log for the UPS.
• User notified via SNMP Trap and e-mail
• Supports Network Time Protocol
• Supports Telnet configuration
• Supports BOOTP/DHCP
• Supports security protocols - HTTPS, SSH, SFTP, and SNMPv3
• Login via RADIUS and local authentication
• Supports Syslog
• Supports IPv4 and IPv6
• Supports Environmental Monitoring
To Next Page