Mio N548 - Page 23

22
l
Stop and Go: The default setting is Off. Once enabled, the system will alert
you when the car ahead has proceeded to go after being stopped for longer
than 10 seconds.
l
SafetyCam
Sets how you want to be notied of safety cameras. The available settings
include:
l
Alert Sound: The options are Beep, Voice and Mute.
l
Alert Distance: The system will alert you at a preset distance (Short,
Medium and Long) when a safety camera is detected.
l
Alert Method: Sets the alert distance function according to your driving
speed (Smart Alert) or the speed limit (Standard Alert).
l
Threshold: Sets the speed value for the dash cam to start offering alerts.
l
Cruise Speed Alert: Sets the limit for the cruise speed. When you drive at a
cruise speed over the set value, you will receive alerts by the dash cam.
l
Custom SafetyCam: Lists all user-added safety cameras which are sorted
by the created time.
l
Parking Mode
Allows you to change the settings of Parking mode. The available settings
include:
l
Detection: When enabled, the dash cam will automatically start recording
when it detects movements or if an event happens in Parking mode.
l
Detection Method: The options are Only G-sensor, Only Motion and Both
Motion & G-sensor.
l
Auto Entry: Sets the mode (Low, Medium, High or Manual) for the system
to enter Parking mode automatically.
l
Motion Detection: The options are Low, Medium and High.