23
l
G-Sensor Sensitivity: Sets the sensitivity level (Low, Medium or High) of
the G sensor that allows automatic triggering of the parking recording when
the dash cam is in Parking mode.
l
LED Indicator: The options are On and Off.
l
Video Recording
Changes the settings of recording, including:
l
Video Clip Length: Sets the length of each video clip for a continuous
recording (1 min, 3 min or 5 min).
l
Video Resolution: Sets the resolution of the video.
l
WDR: Enables the WDR (Wide Dynamic Range) function to improve the dash
cam's image quality under high-contrast lighting conditions.
l
EV: Sets the proper exposure level (-1 – +1) to adjust the brightness of the
image. The default setting is 0.
l
Frequency: The options are 50Hz and 60Hz.
l
G-Sensor Sensitivity: Sets the sensitivity level (6 levels, from Low to High)
of the G sensor that allows automatic triggering of the event recording while
continuous recording is in progress.
l
Stamps: Sets the information (Coordinates or G-Sensor) that will be
displayed on the recorded video.
l
Speed stamp: Displays the driving speed on the recorded video.
l
Text stamp: Displays customisable text input information.
l
System
Allows you to change the system settings of the device.
l
Satellites: Displays the status of the GPS/GLONASS signal reception. You
can press
and then select GPS or GLONASS for better signal reception if
the need arises.
To Next Page
Loading...
