Mio VELO - Caring For Your Mio VELO; Cleaning Your Mio VELO; Mio VELO Specifications

Mio VELO User Guide 11
CARING FOR YOUR MIO VELO
Cleaning Your Mio VELO
•
Wash Mio VELO regularly with mild soap and water to prevent skin irritation.
•
Make sure you allow both your arm and the LINK to dry completely before
resuming wear.
•
Avoid scratching the optical sensor area to protect your LINK from damage.
•
Do not expose Mio VELO to strong chemicals such as gasoline, cleaning solvents,
acetone,alcohol,orinsectrepellents.Chemicalscandamagetheseal,case,andnish.
•
After swimming, remove the strap from the sensor unit. Rinse both with tap water and
gently dry with a soft cloth.
•
If your skin becomes irritated, wear VELO on the other arm or discontinue wearing
until the irritation clears.
Other Care Tips
•
Do not attempt to disassemble or service your Mio VELO.
•
Protect your VELO from impact shocks, extreme heat, and extended exposure to direct
sunlight.
•
Mio VELO is water-resistant up to 30 meters only if the button is not pressed under
water and the casing remains intact.
MIO VELO SPECIFICATIONS
Maximum Readable Heart Rate: 220 BPM
Minimum Readable Heart Rate: 30 BPM
Operating Temperature: 5°C to 45°C (41°F to 113°F)
Case: ABS
Caseback: PC+GF
Caseback Charging Pins: SUS316
Strap: Silicone
Water Resistance: up to 30M
Battery: 60mAh Lithium Polymer
Expected Battery Life: Up to 5 Years
Magnets: Neodymium – iron – boron (NdFeB)
Radio Frequency/Protocol: 2.4 GHz ANT+ and Bluetooth Smart (4.0) Wireless Technology