Mio VELO User Guide 04
Wearing Your Mio VELO
To accurately monitor your heart rate:
1. Fasten Mio VELO snugly on your lower forearm, about 1–3 inches (3–8cm) above your
wrist bone. The optical sensor on the back should make good contact with your skin.
2. If you have a smaller wrist, wear Mio VELO higher on your forearm.
3. For cyclists or users with concave wrists, wear the Mio VELO higher and on the
underside of your forearm, since bending of the wrist may affect the heart rate
reading.
4. If you are using Mio VELO with an ANT + sport device, wear both devices on the same
arm for a better ANT+ connection.
Important: For optimal heart rate accuracy, especially if you often have cold hands or poor
circulation, we strongly recommend doing a warm up exercise for a few minutes before you
begin to track your heart rate.
LED
Optical
Sensor
Charging
Pins
Sensor
Lights
YOUR MIO VELO
Button
To Next Page
Loading...
