MIOPS MOBILE Remote User Manual
4. Modes of MIOPS Mobile Remote
In this section, we will explain you how to use the different modes of MIOPS Mobile Remote. You
can select the desired mode using the smartphone app. Once you adjust the parameters and start
the mode running, MIOPS Mobile Remote will take care of the rest. You can find detailed
information about different modes in the following sections.
a. Cable Release
The Cable Release mode is the basic mode to trigger your camera or flash. It does
not have any parameter. The moment you touch the orange button, MIOPS Mobile
Remote will trigger your camera for the duration of the pulse length. If your camera
is in bulb mode, the shutter will stay open as long as the duration of the pulse.
Otherwise, the exposure of the camera settings will be valid.
b. Press & Hold
The Press & Hold mode has a level of flexibility by keeping the shutter open as long
as you keep your finger on the button. This way, you are not limited with the pulse
length. When you touch the button, a counter will start at the bottom of the screen.
You can count how many seconds/milliseconds have passed. The shutter will close
when you release the button. Again, in order to control the shutter with this mode,
the camera must be in bulb mode.
c. Press & Lock
The Press & Lock mode is designed for prolonged exposures. If you do not want to
keep your finger on the screen all the time, you can use this mode. The shutter will
open with a touch on the button and it will stay open until the next touch. When you
touch the button, a counter will start at the bottom of the screen. The camera must
be in bulb mode to have flexible exposure.
d. Timed Release
The Timed Release mode is the perfect solution if you want to control the shutter
with a great precision. This mode has the Exposure parameter to control the
exposure in millisecond. In order to change the parameter, touch the exposure value
and a numeric keypad will appear. You can type in the desired exposure value and
then touch anywhere outside of the circle. The new exposure value will be shown in
the circle. Touch the notch on top of the circle and then pull the curtain down. You
can start the exposure by touching the orange button again.
To Next Page
Loading...
