NEW MIOPS Splash User Manual
Content:
1. Content of the Package
2. Power and Operation
3. First Use
4. Camera and Flash Connection
5. Mobile Application
6. Connecting to MIOPS Splash
7. Firmware Upgrade
8. Using the Mobile Application
9. Adjusting Parameters
9.1 1st Drop
9.2 2nd Drop
9.3 Trigger
9.4 Auto Adjustment
10. Example Setup
11. Settings Screen
12. Valve Cleaning
13. Troubleshooting
1. Content of the Package
When you purchase a NEW MIOPS Splash Water Drop Kit, it will be delivered
with the following items.
1 x MIOPS Splash
1 x MIOPS Splash Holder (11” articulating arm)
1 x USB Power Cable
1 x Flash Cable (3.5mm to PC SYNC)
2. Power and Operation
Your MIOPS Splash comes with Micro USB power cable so you can attach it to
any USB power source to turn it on. When you attach your MIOPS Splash to any
USB power source, the LED will blink with short intervals which means it is
waiting for pairing with Miops Mobile app.
3. First Use
Your MIOPS Splash may not be delivered with the latest firmware. If a new
firmware has been released, before you have used it for the first time,
To Next Page
Need help?
General
