MIOPS Splash User Manual

NEW MIOPS Splash User Manual
Content:
1. Content of the Package
2. Power and Operation
3. First Use
4. Camera and Flash Connection
5. Mobile Application
6. Connecting to MIOPS Splash
7. Firmware Upgrade
8. Using the Mobile Application
9. Adjusting Parameters
9.1 1st Drop
9.2 2nd Drop
9.3 Trigger
9.4 Auto Adjustment
10. Example Setup
11. Settings Screen
12. Valve Cleaning
13. Troubleshooting
1. Content of the Package
When you purchase a NEW MIOPS Splash Water Drop Kit, it will be delivered
with the following items.
1 x MIOPS Splash
1 x MIOPS Splash Holder (11” articulating arm)
1 x USB Power Cable
1 x Flash Cable (3.5mm to PC SYNC)
2. Power and Operation
Your MIOPS Splash comes with Micro USB power cable so you can attach it to
any USB power source to turn it on. When you attach your MIOPS Splash to any
USB power source, the LED will blink with short intervals which means it is
waiting for pairing with Miops Mobile app.
3. First Use
Your MIOPS Splash may not be delivered with the latest firmware. If a new
firmware has been released, before you have used it for the first time,

MIOPS Splash Specifications

General

Connectivity	Bluetooth
App Control	Yes
Valve Type	Solenoid Valve
Type	Water Drop Kit
Compatibility	iOS, Android
Trigger Modes	Sound
Operating Temperature	0°C to 50°C

Summary

Content of the Package

Power and Operation

First Use

Camera and Flash Connection

Mobile Application

Connecting to MIOPS Splash

Firmware Upgrade

Using the Mobile Application

Adjusting Parameters

1st Drop

Sets the size of the first water drop in milliseconds.

2nd Drop

Sets the size and delay for the second water drop in milliseconds.

Trigger

Configures delay and mode for camera or flash triggering after drops.

Auto Adjustment

Automates finding optimal Drop Size and Delay parameters.

Example Setup

Settings Screen

Valve Cleaning

Troubleshooting