MIOPS MOBILE Remote User Manual
This mode has two other parameters as well.
The first one is the delay. It determines the
duration between the motion and the
triggering of your camera. You can define the
delay in milliseconds anywhere between
10ms and 99 hours.
The last parameter is the “Frame”. This
parameter defines how many pictures to be
taken in case a motion is detected. Once a
motion is detected, MIOPS Mobile will trigger
the camera for so many times defined with
the Frame parameter. You can set the frame
the number all the way up to 99999. If you set
it to “Zero”, MIOPS Mobile will keep taking
pictures for ever.
To Next Page
Loading...
