MIOX RIO Series Operators Manual
P/N: 102-00076-G Page 7
Introduction
This manual is designed to provide installation, operation, and maintenance guidelines to
the water plant operator. Proper maintenance of the system will increase cell life and
system performance. Follow all warnings and precautions when installing, operating, and
maintaining your On-Site Generator (OSG). Should advanced troubleshooting be required
to solve a problem, please contact your MIOX Customer Service provider for further
assistance.
Regulatory Compliance
U. S. Environmental Protection Agency (US EPA)
On-site oxidants are listed as a compliance technology for water disinfection. To be listed
as a compliance technology, the system must be cost effective and achieve compliance with
the regulated maximum contaminant levels (MCLs), and the operator must be capable of
reliably operating the technology. The on-site oxidant category was added to this list in
1997 primarily based on independent research of MIOX technology.
NSF International
MIOX maintains a policy of verification and compliance of MIOX technology for water
applications. The NSF Standard provides the criteria used to evaluate the public health
safety of materials, components, products, or systems that contact drinking water, drinking
water chemicals, or both. For details of specific NSF standards for specific MIOX equipment,
please consult with MIOX. NSF listings are also available through NSF International at (800)
NSF-Mark or their web site at www.nsf.org.
State Approvals
MIOX maintains a policy of obtaining state regulatory approval in all states where MIOX
equipment is installed and operated. MIOX has never been rejected for approval in any
state. For a complete of states currently approving on-site oxidant technology, please
contact MIOX
List of Certifications
EPA Registration Number: 69723-NM-001
To Next Page
Loading...
