Mira Advance User Guide

5
1306246-W5-A
Using the Shower
Each time the shower is operated it will conrm its status
during the start-up process, conrming the mode setting and
when the temperature is reached. Note! Further temperature
adjustments during showering will not conrm temperature
has been reached.
Standard Mode
When starting in standard mode the product will beep
once when the start/stop button is pressed and the amber
status light & white start/stop light will pulse. When the set
temperature has been achieved the lights will stop pulsing
and the shower will beep to conrm
BEAB Mode
When starting in BEAB care mode the product will beep three
times when the start/stop button is pressed and the green
status light & white start/stop light will pulse. When the set
temperature has been achieved the lights will stop pulsing
and the shower will beep to conrm.
Starting from Cold
When starting the shower with temperature set in cold
position the product will beep once when the start/stop button
is pressed and the blue status light & white start/stop light
will pulse, when full cold ow is achieved the lights will stop
pulsing and the shower will beep to conrm. If the shower
temperature is adjusted to a higher temperature from cold
in either standard mode the amber status light or BEAB
mode the green status light will be indicated but there will
be no further indication to conrm set temperature has been
achieved.

Mira Advance Specifications

General

Temperature Control	Thermostatic
Warranty	2 Years
Power Ratings	9.8 kW
Water Connection	15 mm
Outlet Connection	1/2"
Water Pressure	0.7 - 10 bar
Cable Entry Points	Bottom entry
Safety Features	Overheat protection
Approvals	WRAS