Mira Advance User Guide

6
1306246-W5-A
Read the section: 'Safety Information' rst.
With the electrical supply
turned on, press Start/Stop.
1
_
+
Adjust the temperature and allow approximately 30 seconds
for any temperature adjustments to reach the showerhead.
The start/stop and status lights will pulse while getting up
to temperature and the shower will beep once temperature
reached.
2
_
+
Check water temperature
before entering shower.
3
Operating the Shower

Mira Advance Specifications

General

Temperature Control	Thermostatic
Warranty	2 Years
Power Ratings	9.8 kW
Water Connection	15 mm
Outlet Connection	1/2"
Water Pressure	0.7 - 10 bar
Cable Entry Points	Bottom entry
Safety Features	Overheat protection
Approvals	WRAS