3
INTRODUCTION
Thank you for purchasing a quality Mira product. To enjoy the full potential of your
new product, please take time to read this guide thoroughly, having done so, keep
it handy for future reference.
The Mira Coda Pro thermostatic bar valve is a shower control designed for wall
mountd installations.
The thermostatic bar valve has two knobs, one knob controls the ow and the other
knob controls the temperature.
There is an ECO ow stop to encourage reduced water usage, which can be
overriden.
The thermostatic bar valve incorporates a wax capsule temperature sensing
unit, which provides an almost immediate response to changes in pressures or
temperature of the incoming water supplies, to maintain the selected temperature.
An adjustable maximum temperature stop is provided which limits the temperature
to a safe level. Inlet lters are supplied and must be tted to protect the thermostatic
cartridge.
The Mira Coda Pro is supplied complete with an easy, front of wall xing kit which
has been designed to make the installation of bar valves easier and more secure
and has the following benets over traditional ‘Z’ offset connectors:
• 2nd x installation after tiling has been completed
• Water connections are made in front of the nished wall surface
• Bar valve is secured to the wall
• Foam seal to prevent water ingress
• Suitable for any bar valve using 3/4” female threads
• Can be used on plastic barrier pipes (with suitable pipe insert)
If you experience any difculty with the installation or operation of your new
Thermostatic Mixer, please refer to ‘Fault Diagnosis’, before contacting Mira
Showers. Our contact details can be found on the back cover of this guide.
To Next Page
Loading...
Need help?
General
