EasyManuals Logo

Mira CODA PRO User Manual

Mira CODA PRO
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
SPECIFICATIONS
Pressures
Max Static Pressure: 10 Bar.
Max Maintained Pressure: 5 Bar.
Min Maintained Pressure: (Gas Water Heater): 1.0 Bar (for optimum
performance supplies should be nominally equal).
Min Maintained Pressure (Gravity System): 0.1 Bar (0.1 bar = 1 Metre head
from cold tank base to shower handset outlet).
Temperatures
Close temperature control is provided between 20°C and 50°C.
Optimum Thermostatic Control Range: 35°C to 45°C (achieved with supplies
of 15°C cold, 65°C hot and nominally equal pressures).
Recommended Hot Supply: 60°C to 65°C (Note! The mixing valve can operate
at temperatures up to 85°C for short periods without damage. However for
safety reasons it is recommended that the maximum hot water temperature is
limited to 65°C).
Minimum Recommended Differential between Hot Supply and Outlet
Temperature: 10°C at desired ow rates.
Cold Water Range: up to 25°C.
Thermostatic Shut-down
For safety and comfort the thermostat will shut off the mixing valve within
2 Seconds if either supply fails (achieved only if the blend temperature has a
minimum differential of 12°C from either supply temperature).
Connections
Hot: Left (side nearest ow control), 15 mm compression.
Cold: Right (side nearest temperature control), 15 mm compression.
Outlet: Bottom, ½” BSP Male to exible hose.
Note! This product does not allow for reversed inlets and will deliver unstable
temperatures if tted incorrectly.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mira CODA PRO and is the answer not in the manual?

Mira CODA PRO Specifications

General IconGeneral
Enclosure RatingIP65
Weight300g
Measurement Range0 - 100%
Operating Humidity0-95% RH (non-condensing)
Output4-20 mA

Related product manuals