Mira Sprint 7.5 - Page 29

29
Malfunction Cause
Remedy
Handset sprayplate
blocked.
Remove and clean (Refer to
Maintenance in the I, O & M
guide for the fitings).
Other outlets being used
whilst showering, causing
water pressure to drop
below minimum required
to operate appliance.
Ensure other outlets e.g. bath,
washing machine or
dishwasher are not in use
whilst showering.
Water pressure below
minimum required for
appliance operation.
Ensure incoming water supply
stopcock and or appliance
isolating valve turned fully on .
If fault still persists contact
your installer.
Unable to select a
cool enough shower
during summer
months.
Due to the rise in water
mains supply temperature,
the power rating may be
too high.
Turn the TOP knob to
MEDIUM setting and re-adjust
temperature knob until
suitable temperature is
achieved.
Operation of
temperature knob has
little or no effect on
water temperature.
Remove Handset and clean
(Refer to Maintenance in the
I, O & M guide for the fitings).
If fault still persists contact
your installer.
Handset sprayplate
blocked.
(Continued)