29
Proper Bridle Routing for Main Container
Proper routing of the main bridle for standard right!
handed main deployment [Fig" #]" Note that the bridle
passes from the right of the container$ to the pin$ and
back out to the right" It does not cross over the %& flap"
IMPORTANT:
Do not cross the main bridle from left
side to right side of the main pin cover flap$ as this may
cause a slow deployment or a main pilot chute in tow
[Fig" &]" The bridle must be routed on the same side of
the main pin cover as the bridle is routed into the main
pilot chute pouch"
Fig" #
Fig" &
Incorrect routing
MIRAGE SYSTEMS
To Next Page