MIRAGE SYSTEMS G4 - Attaching Steering Toggles; Stowing Reserve Canopy Steering Line; Attaching Temporary Pile Velcro Tabs; Securing the Pilot Chute Bridle

4
Packing the Reserve Container
Attach the square reserve to the container system!
Attach the steering toggles and set the deployment
brake length according to canopy manufacturers
instructions! [Fig! "]
Stow excess reserve canopy steering line in velcro keep#
er! Mate toggle to velcro on reserve riser! Repeat on
opposite riser! [Fig! $ & %]
Attach temporary pile velcro tabs to the hook side of
velcro on the line stow pocket of reserve freebag!
[Fig! &]
WARNING: Be careful: hook velcro may damage sus#
pension lines!
Thread looped end of bridle through pilot chute loops'
then pass freebag through looped end of bridle to form
a larks head knot! Center bridle on pilot chute loops and
cinch
very
tight
! [Fig! (]
Fig! "
Fig! $
Fig! %
Fig! &
Fig! (
MIRAGE SYSTEMS