EasyManua.ls Logo

Mircom FleXNet FX-4000 - Page 121

Mircom FleXNet FX-4000
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
118
30.2 QMP-5101N/QMP-5101NV Pushbutton Controls
Warden Page Button
When depressed, the Warden Page button enables voice paging from the firefighters'
telephone (if connected) to all zones selected for paging, unless page inhibit is active. Note
that pressing PTT will not result in any paging activity unless there are zones selected for
paging. Also note that there must be an active firefighters' telephone connection for warden
paging to occur.
All-Call Button
Selects all zones for voice paging.
All-Call Minus Button
Inverts the selection of zones for voice paging.
Page to Evac
Pressing this button selects all the audio zones currently in evacuation mode, for paging.
Page to Alert
Pressing this button selects all the audio zones currently in alert mode, for paging.
Page Cancel
Pressing this button de-selects all zones (including those manually selected) from paging.
Lamp Test Button
Momentarily activates all LED indicators.
Microphone PTT Button
The microphone's PTT (push-to-talk) button is located on the microphone itself. When
depressed, allows voice paging (from the microphone) to be enabled to all zones selected for
paging, unless page cancel is active. Note that pressing PTT will not result in any paging
activity unless there are zones selected for paging.
30.3 QAZT-5348DS and QAZT-5302DS Paging Selector Panel LEDs
Page LED
Illuminates green if the zone is selected for voice paging.
Trouble LED
Flashes amber to indicate that the zone is in trouble.
30.4 QAZT-5348DS and QAZT-5302DS Pushbuttons
Page Button (if enabled)
Selects / deselects that zone for voice paging.

Table of Contents

Other manuals for Mircom FleXNet FX-4000