Need help?Do you have a question about the Mircom FleXNet FX-4000 and is the answer not in the manual?
General| Brand | Mircom |
|---|---|
| Model | FleXNet FX-4000 |
| Category | Measuring Instruments |
| Language | English |
Overview of the FleX-Net™ FX-4000 system, its features, and capabilities for fire detection and voice evacuation.
Highlights key features of the FleX-Net™ system, including capacity, networking, and design flexibility.
Details the different main chassis models available for the FX-4000 system, including their specifications.
Describes essential network controller modules like FNC-2000 and ANC-4000 for system connectivity.
Lists and describes various adder modules for expanding system functionality, such as loop and circuit modules.
Details available display modules for the system, including LCD and graphical displays for user interface.
Covers programmable modules like input switches and fan damper controls for system customization.
Describes modules for audio paging and telephone communication integration within the system.
Explains remote annunciator models like RAXN-4000LCD and their functionalities.
Provides installation details and dimensions for the BBX-1024DS enclosure.
Details installation and dimensions for BBX-1072ADS enclosures, including flush and surface mounting.
Illustrates locations for mounting various modules within the main chassis.
Details jumper and connector settings for the main fire alarm module.
Explains jumper configurations for the DM-1008A detection adder module.
Describes settings and connections for the ALCN-960MISO quad loop adder module.
Provides terminal connection details for wiring devices to the main fire alarm board.
Details wiring diagrams for SLC loops in Class B and Class X configurations.
Illustrates terminal connections for the DM-1008A hardwire detection adder module.
Explains the function of various LEDs and buzzers on the control panel.
Describes the function of LCD display, queue buttons, and cursor buttons.
Defines different types of initiating and indicating circuits used in the system.
Details the various evacuation codes used for audio signaling.
Details the main network fire alarm board (FX-4000MNS) for integrated cabinets.
Describes network controller modules like FNC-2000, ANC-4000, and TNC-5000.
Lists and describes adder modules such as DM-1008A, SGM-1004A, and RM-1008A.
Wiring details for the QAA-5230-70/25 amplifier, including Class A/B configurations.
Wiring instructions for the QAA-5230S-70/25 amplifier with split speaker outputs.
Wiring for QAA-5415-70 and QAA-5415-25 amplifiers, covering 70V and 25V outputs.
Details wiring for the QAA-5160-70/25 amplifier, supporting 60W speaker circuits.
Provides detailed electrical specifications for the PS-2040 power supply.
Details specifications for the QPS-5000N power supply and QBC-5000N battery charger.
Provides specifications for the QAA-5160-70/25 amplifier, including output voltage and wattage.
Details specifications for the QAA-5230-70/25 amplifier, including zone output and wattage.
Table of DIP switch settings for configuring node addresses on the main board.
Wiring details for QMP-5101N paging module in Mass Notification System.
Describes configuration steps for mass notification, including zone priority.
Explains the active status indication for FX-LOC(R) in Mass Notification System.
Details emergency response operations for the ACU in Mass Notification System.
To Next Page
