Need help?Do you have a question about the Mircom TX3-200-4U-B and is the answer not in the manual?
General| Brand | Mircom |
|---|---|
| Model | TX3-200-4U-B |
| Category | Intercom System |
| Language | English |
Overview of Mircom's TX3 telephone access systems and their capabilities.
Explains the Auto Dialer (ADC) and No Subscriber Line (NSL) telephone connection types supported.
Explains the importance and procedure for grounding the system to reduce electrical shock risk.
Covers the installation of Universal, Slim-Line, and Continental enclosures for Lobby Control Units.
Step-by-step guide for installing the Universal enclosure, including semi-flush and surface mount options.
Overview of the TX3 system's networking capabilities, including RS-485 and Ethernet connections.
Explains how to network TX3 devices using RS-485 and Ethernet TCP/IP networks.
Details typical wiring arrangements for the Lobby Control Unit, including power and telephone line connections.
General layout and components of the main controller board.
RS-485 connection specifications and wiring.
Setting the unit's RS-485 ID address using DIP switches.
Outlines the process of configuring the system using a PC and Mircom's TX3-MSW software.
Covers the mechanical installation of NSL Relay cabinets, including enclosure sizes and mounting.
Provides detailed wiring instructions for the TX3-NSL-8M Main Controller Board.
Details the wiring of the 2012 NSL Relay Board, including BIX and RJ-71C block configurations.
Covers the mechanical installation of the Elevator Restriction cabinet.
Details the wiring connections for the Elevator Restriction Unit and its controller board.
Describes the 2012E Elevator Restriction Relay Card, its relay contacts, and jumper settings.
Instructions for configuring the Elevator Restriction Unit ID using DIP Switch SW2.
Describes firmware update methods for the Elevator Restriction Unit using TX3 Configurator.
Guides on integrating additional controllers like Card Access or Elevator Restriction Units into the TX3 system.
Instructions for residents using the NSL system to grant access and use features.
Instructions for residents using the ADC system to grant access.
To Next Page
