Need help?Do you have a question about the Mircom TX3 Series and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Keypad | Yes |
| Frequency Response | 300Hz - 3.4kHz |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Programming | PC |
| Mounting | Surface or Flush |
| Connectivity | RS-485, Ethernet |
| Construction | Metal |
| Relay Outputs | 2 |
| Current Consumption | 500mA |
| Operating Temperature | -10°C to +50°C |
| Humidity | 0% to 93% non-condensing |
| Material | Metal |
| Operating Voltage | 24V DC |
Overview of TX3 systems, capabilities (ADC/NSL), and networking options.
Details TX3 series features, enclosure types (Universal, Slim-Line, Continental, Kiosk), and accessories.
Covers ADA mounting standards, warranty information, and special notices.
Information about the manual, version control, additional docs, and contact details.
Explains grounding and installation of Universal, Slim-Line, and Continental enclosures.
Instructions for installing the heater and the TX3-2000-8K-A Kiosk.
Overview of TX3 system, ADC/NSL, and single/multiple unit configurations.
Details networking via RS-485, Ethernet TCP/IP, and combined networks.
Typical wiring arrangement for the Lobby Control Unit.
Overview of the controller board, including connectors, switches, and jumpers.
Details the bottom and top connectors on the controller board.
Setting RS-485 ID, PC configuration, system requirements, and firmware updates.
Mechanical installation of NSL cabinets and info on NSL Control Unit, expanders, and relay boards.
Details wiring of the TX3-NSL-8M Main Controller Board, including connectors and telephone lines.
Procedure for updating firmware for the TX3-NSL-8M unit using the configurator software.
Describes the mechanical installation of the Elevator Restriction cabinet.
Explains unit function, controller board wiring, and RS-485 connections.
Overview of the backplane and details on the 2012E Elevator Restriction Relay Card.
Instructions for unit configuration via DIP switch and firmware update procedures.
Guide on integrating additional controllers into the TX3 system via RS-485 or Ethernet.
Lists technical specifications for the system, including temperature, power, door strikes, and modems.
Operating instructions for residents using the NSL system, including granting access and call waiting.
Operating instructions for residents using the ADC system, including granting access and keyless entry.
To Next Page