To Next PageTo Next Page
Need help?Do you have a question about the Mircom ADC Series and is the answer not in the manual?
General| Category | Intercom System |
|---|---|
| Material | ABS Plastic |
| Frequency Response | 300Hz |
| Humidity | 95% non-condensing |
| Color | White |
Key features and capabilities of the scrolling directory system.
Key features and capabilities of the non-scrolling directory system.
Shared functionalities and capabilities across both system types.
How visitors and residents interact with the scrolling directory system.
How visitors and residents interact with the non-scrolling directory system.
Diagram illustrating a single entrance system configuration and wiring.
Diagram illustrating a multiple entrance system configuration and wiring.
Details on available entry/lobby panel models and their specifications.
Information on available ADC series controllers and optional software kits.
Specifies power transformer and door strike compatibility and requirements.
Guidelines for choosing an optimal installation location for the entry panel.
Requirements and considerations for the dedicated telephone line.
Information on wire types and gauges needed for system configuration.
Details on obtaining and installing a postal lock.
Instructions for mounting universal type lobby/entry panels.
Instructions for installing optional accessories like magnetic letter kits and heaters.
Instructions for mounting continental type lobby/entry panels.
Instructions for wiring door strikes and electromagnetic locks.
Wiring for lock-back switch and door override functions.
Wiring for relays, system power, and lamp supplies.
Instructions for wiring speaker, microphone, and keypad/display.
Important notice on earth grounding and system power-up procedures.
Overview of the elevator recall/restriction feature's functionality.
How the elevator recall feature works for single and multiple entrances.
Steps to access and enter the programming mode for the system.
How to enter resident dial codes and their associated telephone numbers.
How to program and manage keyless entry codes for door access.
Steps to change the system's master code for security.
Configuring the DTMF digit used to open main and auxiliary doors.
Adjusting door open and on-line timers.
Steps to access and enter the programming mode for the non-scrolling system.
How to enter resident dial codes and their telephone numbers for non-scrolling.
Programming keyless entry codes for the non-scrolling system.
Changing the master code for the non-scrolling system.
Configuring DTMF door open codes for the non-scrolling system.
Adjusting microphone, speaker, and pulse sensitivity controls.
How to adjust the contrast level of the display screen.
