MIRCOM TECHNOLOGIES LIMITED, ADC Series: Autodialer Telephone Access Systems Page 43
Door-Open Timer
00 to 99 Sec. _ _
Enter the desired door-open period. The next display should appear...
#=Store, *=Abort
00 to 99 Sec. x x
Press # to store or * to abort entry. After pressing the store button, the next display should appear...
Press *
To exit
Press * to exit to PROGRAM MODE menu. To quit, enter *000 while at PROGRAM MODE menu to return to
NORMAL MODE.
SET ON-LINE TIMER
To change the On-Line period (factory default is 60 sec.), scroll through until you reach the feature as shown below.
Adjust On-Line
Timer - Press #
Press # to access the feature. The display should appear...
On-Line Timer
00 To 99 Sec. _ _
Enter the On-Line period. The next display should appear...
#=Store, *=Abort
00 To 99 Sec. x x
Press # to store or * to abort entry. Press * to exit to PROGRAM MODE menu. To quit, enter *000 while at
PROGRAM MODE menu to return to NORMAL MODE.
MULTIPLE/SINGLE ENTRANCE SELECT
To select Multiple or Single entrance, scroll through until you reach the feature as shown below.
Pick Mult/Single
Option - Press #
Press # to access the feature. The display should appear...
Multi or Single
M=00 S=11 _ _
Enter 00 for multiple entrances or 11 for single entrance. The next display should appear...
#=Store, *=Abort
M=00 S=11 x x
Press # to store or * to abort entry. The next display should appear...
Press *
To Exit
Press * to exit to PROGRAM MODE menu. To quit, enter *000 while at PROGRAM MODE menu to return to
To Next Page
Loading...
Need help?
General
