MIRCOM TECHNOLOGIES LIMITED, ADC Series: Autodialer Telephone Access Systems Page 34
Enter digits 11 for minutes or 00 for seconds. The default is seconds. The next display should appear...
-Program Options-
#=Store, *=Abort
M=11 S=00 x x
Please enter choice
Press # to store or * to abort entry. Press * to exit to PROGRAM MODE menu. To quit, enter *000 while at
PROGRAM MODE menu to return to NORMAL MODE.
SORT RESIDENTS'/TENANTS’ NAMES
To sort Residents'/Tenants’ names, scroll through until you reach the feature as shown below.
[1=Bck] [3=Fwd]
Do you want to sort
the tenant names ?
[*=Abort] [#=Yes]
Press # to sort Residents'/Tenants’ names. While the system is sorting names, the display should appear...
Sorting Tenant List!
- Please Wait -
Sorting Residents’/Tenants’ names may take a few minutes depending on the number of names to sort.
NOTE: Sorting cannot be done with more than 600 names in the scrolling directory.
The next screen should change to...
Performing copy . . .
- Please Wait -
When finished, the system should exit to PROGRAM MODE menu. To quit, enter *000 while at PROGRAM MODE
menu to return to NORMAL MODE.
To Next Page
Loading...
Need help?
General
