MIRCOM TECHNOLOGIES LIMITED, ADC Series: Autodialer Telephone Access Systems Page 40
Scroll through until you reach the feature as shown below.
To Enter KEYLESS
Codes - Press #
Press # to access the feature. The display should appear...
KEYLESS Entry
Code #_ _ _ _
Enter the four digit Keyless Entry Code. If you make a mistake or wish to reenter the code, press * to enter code
again. The next display should change to...
#=Store, *=Abort
Code # x x x x
Press # to store or * to abort entry. Repeat this process until all codes are entered.
Press * to exit to PROGRAM MODE menu when finished. To quit, enter *000 while at PROGRAM MODE menu to
return to NORMAL MODE.
REVIEW AND DELETE KEYLESS ENTRY CODES
To review and delete keyless entry codes, scroll through until you reach the feature as shown below.
To Edit KEYLESS
Codes - Press #
Press # to access the feature. The display should appear...
Code To Review
# _ _ _ _
Enter the Keyless Entry Code to review or delete. The next display should appear...
KEYLESS Entry
Code # x x x x
Press 1 or 3 to scroll up or down the list. To delete the displayed code, press #.
When finished, press * to exit to PROGRAM MODE menu for programming other functions. To quit, enter *000 while
at PROGRAM MODE menu to return to NORMAL MODE.
REPROGRAM MASTER CODE
Master Code (factory default *999) may be changed to any three (3) digit code number. Since this code is used to
access all levels of programming, it would be a good idea to change the code to one that will be known only by the
installer or management personnel. Please enter the new Master Code in the space provided below for future
reference.
New Master Code: ___________________ Date: ______________________
To change the MASTER CODE, scroll through until you reach the feature as shown below.
To Change MASTER
Code - Press #
Press # to access the feature. The display should appear...
MASTER CODE
*_ _ _
To Next Page
Loading...
Need help?
General
