Mircom ADC Series User Manual

MIRCOM TECHNOLOGIES LIMITED, ADC Series: Autodialer Telephone Access Systems Page 25
ENTERING RESIDENTS’/TENANTS’ CODES AND TELEPHONE NUMBERS:
To enter codes and telephone numbers, scroll through until you reach the feature as shown below.
[1=Bck] [3=Fwd]
Do you want to enter
TENANT Codes?
[*=Abort] [#=Yes]
Press # to access the feature. The screen should change according to the digit length chosen. Below are the possible
screens.
7 digits telephone # (default) 8 digits telephone # 11 digits telephone #
-Program Options- -Program Options- -Program Options-
Code Telephone Code Telephone Code Telephone
____ ___-____ ____ ___-____ ____ ___-____
Please enter choice: Please enter choice: Please enter choice:
Enter up to 7-digit Enter up to 8-digit The first digit is used
telephone number. telephone number. for prefix CODE number
assigned. The remaining
digits are used for standard
7-digit telephone number.
Enter: 000x for one (1) digit dial code
Enter: 00xx for two (2) digit dial code
Enter: 0xxx for three (3) digit dial code
Enter: xxxx for four (4) digit dial code
0 = ZERO x = RESIDENT/TENANT DIAL CODE (numeric 0 to 9)
For example: To call a resident/tenant with two digits dial codes, simply enter xx.
Press # key to blank unused telephone digits. This feature (to be able to blank out any desired digit) is particularly
useful when requiring shorter number of digits to be dialled out through a compatible private DTMF type telephone
system.
When you make a mistake and wish to reenter the Dial Code and Tel. #, press *.
After entering the Dial Code and Telephone Number, the next typical screen should display...
For 7-digits Tel.# For 8 & 11digits Tel.#
-Program Options- -Program Options-
#=Store, *=Abort #=Store, *=Abort
xxxx xxx-xxxx xxxx xxxx-xxxx
Please enter choice: Please enter choice:
Press # to Store or * to abort entry. Repeat this process until all dial codes and telephone numbers are entered. Press
* to return to PROGRAM MODE menu. To quit, enter *000 while at PROGRAM MODE menu to return to NORMAL
MODE.
ENTERING UP TO 11-DIGIT RESIDENTS’ TELEPHONE NUMBERS: Special Feature
As mentioned previously, the user must set the Code and Prefix number when 9 to 11-digit telephone numbers are
required. The following example will illustrate how the unit should be programmed.

Mircom ADC Series Specifications

General

Brand	Mircom
Model	ADC Series
Category	Intercom System
Language	English