MIRCOM TECHNOLOGIES LIMITED, ADC Series: Autodialer Telephone Access Systems Page 47
REVIEW RESIDENT CODE
C To review or edit resident code, dial *202 and wait for the confirmation beep.
C Dial the resident code which you want to review, if a long beep is heard then the code does exist. If an error
tone is heard then that code does not exist.
C To delete the code and telephone, dial # or * to delete.
EXIT PROGRAMMING MODE
To exit from programming mode dial *000. If you do not use the exit code and hang up the telephone, the
system will automatically disconnect after 2 minutes.
To Next Page
Loading...
