110 (119) Telephone Access System Installation and Operation Manual Version 3.7
LT-969 Copyright January 2017
Resident Operating Instructions
9.1 NSL Resident Operating Instructions
Mircom's state-of-the-art door entry system provides you and your guest with an
increased level of confidence and security.
The TX3 Telephone Access system operates with your existing telephone. Your
guest dials your code number or selects your name by scrolling through the
electronic directory on the Entry unit, causing your telephone to ring.
Note: The telephone keypad numbers described in this chapter may be
different for your system. If the keypad numbers do not perform as
described, check with your building administrator to get the correct
values.
9.1.1 Granting Access
When you answer your telephone, you will be in communication with your guest.
To unlock the main door
• Press " 9 " on your telephone keypad
To unlock the auxiliary door
• Press " 6 " on your telephone keypad
To refuse entry
• Hang up or
• Press “4”
9.1.2 Call Waiting Feature
Note: The Call Waiting Feature is available only on NSL systems.
When a guest places a call to you from the Lobby Control Unit while you are
engaged in a conversation on your outside telephone line, you will hear a distinct
tone.
To answer the call
1. Briefly push the call waiting key, “2”, to answer the call. This action
automatically places the outside telephone line "on hold".
To Next Page
Loading...
