MIRKA PROS 550CV - Page 5

4 Mirka® PROS • 150 mm (6") • 125 mm (5") Mirka® PROS • 150 mm (6") • 125 mm (5") 5
Mirka code Item Description Kit Part No Quantity
8995690091 Lever kit 8,0 mm orbit H MPP9009
210 Spring pin MPP0210 1
211 Lever 8,0 mm orbit MPP0213 1
8995690221 Retainer and O-ring kit – PROS DB I MPP9022
411 O-ring MPP0411 2
417 Muffler connection MPP0417 1
8995690121 Housing and mark plate kit J MPP9012
101 Housing MPP0101 1
102 Mark plate MPP0102 1
103 Model sticker (PROS 550, 580, 625, 650 & 680) MPP0103 7
8995690111 Lock ring and O-ring kit K MPP9011
312 O-ring MPP0312 1
313 Lock ring MPP0313 1
8995690131 Cylinder, spring pin and O-ring kit L MPP9013
304 Spring pin MPP0304 1
306 Cylinder MPP0306 1
307 O-ring MPP0307 1
8995690251 Shaft balancer kit 2,5 mm / 125 mm – PROS 525 M MPP9025
315 Shaft balancer 2,5 mm / 100 g pad MPP0330 1
325 Balance screws MPP0325 2
8995690161 Shaft Balancer kit 5,0 mm / 125 mm – PROS 550 M MPP9016
315 Shaft balancer 5,0 mm / 100 g pad MPP0315 1
325 Balance screws MPP0325 2
8995690211 Shaft balancer kit 8,0 mm / 125 mm – PROS 580 M MPP9021
315 Shaft balancer 8,0 mm / 100 g pad MPP0329 1
325 Balance screws MPP0325 2
8995690171 Shaft balancer kit 2,5 mm / 150 mm – PROS 625 M MPP9017
315 Shaft balancer 2,5 mm / 130 g pad MPP0326 1
325 Balance screws MPP0325 2
8995690181 Shaft balancer kit 5,0 mm / 150 mm – PROS 650 M MPP9018
315 Shaft balancer 5,0 mm / 130 g pad MPP0327 1
325 Balance screws MPP0325 2
8995690191 Shaft balancer kit 8,0 mm / 150 mm – PROS 680 M MPP9019
315 Shaft balancer 8,0 mm/ 130 g pad MPP0328 1
325 Balance screws MPP0325 2
8995690201 Muffler connection and O-ring kit – PROS CV N MPP9020
402 Muffler connection MPP0402 1
411 O-ring MPP0411 2
8995690231 Hose assembly kit 1,8 m – PROS DB O MPP9023
414 Hose air tube MPP0414 1
418 Fastening straps MPP0418 5
419 Hose 1,8 m for PROS DB MPP0419 1
8995690241 Muffler connection kit – PROS NV P MPP9024
421 Muffler connection MPP0421 1
Separate parts on next page.
NOTE! Repairs done by non-authorized repairer will breach the Mirka warranty.
Power tool must be serviced by a qualified repair person and in accordance with national requirements.