How to fix no light from multi-purpose LED on MIRKA LEROS Sander?
If there is no light from the multi-purpose LED when you switch on your MIRKA Sander, the power cord might not be properly attached to the sander or the mains socket. Make sure the power cord is correctly connected.
What to do if the MIRKA LEROS Sander stopped and the multi-purpose LED is red?
If the multi-purpose LED on your MIRKA Sander is red and the sander has stopped, it indicates that the tool has entered safety mode because of high temperature. Allow the tool to cool down before resuming use.
Why is my MIRKA LEROS slowing down and the LED is red?
If the multi-purpose LED is red and the MIRKA Sander slows down to 4,000 rpm while sanding, it means the sander's temperature is too high due to a heavy, long-term load. Reduce the load on the sander for a while, and it should return to its normal speed.
Why is the LED flashing red and green on my MIRKA LEROS?
If the multi-purpose LED on your MIRKA Sander is flashing red and green, it means that the sander is connected to a mains outlet with the wrong voltage. Connect the sander to a mains outlet that matches the tool's nominal voltage.
General| Power | 350 W |
|---|---|
| Voltage | 220-240 V |
| Weight | 3.5 kg |
| Disc Diameter | 225 mm |
| Dust System | Central Vacuum Ready |
| Cable Length | 4 m |
| Dust Extraction | Yes |
| No-load Speed | 4000 - 8000 rpm |
Detailed diagram of the grinding head components.
Detailed diagram of the handle components and controls.
List of spare part kits with Mirka codes and descriptions.
Comprehensive list of spare parts and accessories for the tool.
Statement of compliance with relevant standards and regulations.
Crucial guidance for safe installation, operation, and maintenance.
Essential protective gear for safe tool operation.
FCC and Industry Canada compliance details for the device.
Key specifications including power, voltage, speed, and weight.
Measured noise and vibration emission values according to EN 62841-1.
Guidelines on the intended purpose and limitations of the sander.
Recommendations for safe and effective working environments.
Steps to unpack, inspect, and prepare the tool for initial use.
Detailed steps for operating the sander, including speed adjustment.
Information on connecting the tool via Bluetooth to an app.
Step-by-step guides for replacing backing pads, interfaces, and brake seals.
Guidance on seeking professional servicing for the tool.
Common issues and their solutions for the Mirka LEROS.
Guidelines for the environmentally responsible disposal of old appliances.
To Next Page
