EasyManua.ls Logo

MirroCraft 1685 - Console Components and Features; Courtesy Lights Wiring and Troubleshooting; Horn System and Usage Regulations; Seat Base Installation Warning

Default Icon
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Courtesy Light
The courtesy lights are either wired to the courtesy light switch or the accessory
switch, depending which model you purchased. Both are supplied with a fuse or
circuit breaker. If the lights do not work, first check the fuse or circuit breaker
and then check the bulbs and connections.
Horn
The horn is connected to a push button on the switch panel that is protected
with a fuse or circuit breaker.
NOTICE:
Not all MirroCraft boats have horns installed. Check with
Coast Guard regulations to see if you are required to
have a horn or some other signaling device.
Seat Bases
All seat bases are factory installed in locations that have been reinforced to han-
dle the stresses associated with operating your boat. Check seat fasteners prior
to using your boat.
WARNING:
Do not attempt to move or install new bases without
contacting your local MirroCraft dealer.
69877_36635 4/4/11 10:17 PM Page 11