27
LAUNCHING
Prelaunching inspection
Before launching your boat it is recommended that you do the following:
• Inspect the hull and propeller for damage.
• Check electrical system and navigation lights.
• Check the operation of the bilge pump.
• Install drain plug.
• Check that all safety equipment that is required is in the boat and is in
operable condition.
• Do a visual check of motor for any problems.
• Check fuel level.
• Remove engine support bracket if used and tilt motor to its highest
position.
• Before backing down the boat ramp check the following:
• Remove tie downs
• Secure all gear
• Check safety equipment
• Disconnect trailer lights to prevent shorting
Launching and Loading
Follow the recommendations supplied in the manual that came with your boat
trailer.
To Next Page
Loading...