Mitel 6710 - Phone Setting Configurations; Set Flash Time; Set Ring Melody

MITEL 6710 ANALOG PHONE - OPERATION GUIDE
AMT/PUD/TR/0108/1/6/EN 06/2015 11
10 PHONE SETTING
Different combination of key sequences are used on different parameter settings as shown in the table
below.
PARAMETERS
PROGRAMMING KEY
SEQUENCE
LOCK
PROTECTED
VALID SETTINGS
DEFAULT
Set flash time [save]+[#]+[0]+[1]+[#]+
[X]+[#]
Yes 1: 100 ms
2: 200 ms
3: 300 ms
4: 400 ms
6: 600 ms
9: 900 ms
300 ms
Set ring melody [save]+[#]+[0]+[2]+[#]+
[X]+[#]
Yes 1 ~ 8 RING 1
Set Flash time
1. During On-hook, press [save]+[#]+[0]+[1]+[#]+[X]+[#]
X could be set from 1 (100ms) / 2 (200ms) / 3 (300ms) / 4 (400ms) / 6 (600ms) / 9 (900ms).
2. If the setting successes, a confirmation ring will be generated.
Set Ring Melody
1. During On-hook, press [save]+[#]+[0]+[2]+[#]+[X]+[#].
X could be set from 1 to 8 (melodies 1~8).
2. If the setting successes, the new ring melody is played