Mitel 6730 - Basic Operation; Dialing and Call Initiation

MITEL 6730 ANALOG PHONE - OPERATION GUIDE
8 06/2015 AMT/PUD/TR/0107/1/6/EN
6 BASIC OPERATION
6.1 DIAL AND PRE-DIAL
Dial
Pick up the handset (or press [ ] for handsfree / headset operation) and press numeric key, [*],
[#] or [Pause] to dial out.
Pre-dial
During on-hook, press numeric key, [*], [#] or [Pause] for the number to be dialed (max. 32 digits).
Press [ ] or [ ] key or pick up the handset, the phone will dial out the number.
6.2 CALL BY HANDSFREE
1. Press [ ] and enter the number by using the dial pad.
2. To hang up the phone, press [ ] again.
3. When you are talking on handset, you can switch to handsfree mode by pressing [ ].
6.3 CALL BY HEADSET
1. Insert a headset to the phone.
2. Press [ ] and enter the number using the dial pad.
3. To hang up the phone, press [ ] again.
4. When you are talking on handset, you can switch to headset mode by pressing [ ].
6.4 MUSIC ON HOLD
1. When a call is in progress, press [ ] to hold the call (LED on).
2. Press [ ] again or toggle the hook switch to resume the call (LED off).
6.5 MUTE
1. When a call is in progress, press [ ] to mute (LED flashing).
2. To speak to the caller, press [ ] again (LED off).
6.6 GOODBYE KEY
1. During off-hook by handset, press [ ] to process another call.
2. During off-hook by handsfree/headset , press [ ] to hang up.
6.7 REDIAL
1. Press [ ], the display shows the last number you have dialed.
2. There are up to 5 most recent redial number, press [ ] or [ ] to view the records.
3. Lift the handset or press either [ ] or [ ] to dial out.
6.8 RECEIVING, ANSWERING AND ENDING AN ANNOUNCEMENT
1. You have received an announcement (intercom) and answered it with handset or the loudspeaker key.
2. Once your call party has ended the announcement, you have to press afresh the loudspeaker key. Only
then your phone returns to the idle state and is hence not busy for incoming calls.