Mitel 6730a - Phone Setting; Set Password; Set Lock state; Set Time;Date

Mitel 6730a User Guide
14
Set Password
1. Press [ ] > Phone Setting > Set Password.
2. Press numberic keys to input the OLD password (default – ‘0000’).
3. Press [ ] or [
] to confirm the OLD password.
4. Press numberic keys to input the NEW password.
5. Press [ ] or [
] to confirm the NEW password.
6. Enter the NEW password again for reconfirmation.
7. Press [ ] or [
] to complete the setting.
Set Lock state
1. Press [ ] > Phone Setting > Set Lock State.
2. When the display shows “ENTER PASSWORD”, enter the password.
If the phone is locked:
3. Display shows “UNLOCK?”.
4. Press [ ] or [
] to unlock / Press [ ] or [ ] to quit without change.
If the phone is unlocked (default):
5. Display shows “LOCK?”.
6. Press [ ] or [
] to lock / Press [ ] or [ ] to quit without change.
Note: The phone is unlocked by default. While the state is changed to ‘LOCK’, you need
to enter password for deleting the calls record and phonebook or to change the settings
which are lock protected (see “Menu Operation”).
LCD Contrast
1. Press [ ] > Phone Setting > LCD Contrast.
2. Press [ ] or [ ] to adjust the display contrast.
3. Press [ ] or [
] to confirm.
Set Flash Time
1. Press [ ] > Phone Setting > Set Flash Time.
2. Press [ ] or [ ] to select the needed flash time.
3. Press [ ] or [
] to confirm.
Set Time/Date
1. Press [ ] > Phone Setting > Set Time/Date.
2. Press [ ] or [ ] to adjust the “time”.