Operation and Maintenance
Event message Trigger condition
Details
63
Severity
System memory usage
over the critical range
The memory usage in the file
system for a specific purpose
has exceeded a defined (Serious
severity level) or critical (Critical
severity level) value.
Purpose (file type ID):0: File
system, 1: Application, 2:
Crash-Log, 3: Monitor-Log,
4: Announcement service, 5:
Voice mail, 6: Music on hold,
7: Data backup, 8: Hospitality/
Accommodation, 9: User folder
File type ID,
memory usage in
%, date, time
Serious / Critical
(negative, with
match)
System overload Network access attempted when
all lines are seized or the system is
overloaded.
Route number,
user number, date,
time
Normal (without
match)
System phone in
service again
A system phone on the DSI bus is
ready for operation again.
Card number,
port number, user
number, date, time
critical (positive,
with match)
System phone out of
service
A system phone on the DSI bus is
defective or was disconnected.
Card number,
port number, user
number, date, time
critical (negative,
with match)
Temperature within
normal range again
Following overheating,
the temperature inside the
communication server is back in
the normal operating range.
Card number,
temperature, date,
time
critical (positive,
with match)
Temporary activation
expires on
Reminder of the missing, definitive
activation licence following
connection set-up with the
communication server.
Expiration date
[DD.MM.YYYY],
date, time
Serious (without
match)
Terminal power supply:
Overload (Mitel 470
only)
Rated output slightly exceeded for
> 4 s.
Date, time critical (negative,
with match)
63
The node is also always indicated in an AIN.
Release 7.1
System Manual for Mitel SMB Controller 246
To Next Page
Loading...
Need help?
General
