Mitel 6940 Installation Guide

The Mitel word and logo are trademarks of Mitel Networks Corporation, including itself and subsidiaries and authorized entities.
Any reference to third party trademarks are for reference only and Mitel makes no representation of the ownership of these marks.
Mitel’s Power over Ethernet (PoE) Powered Device (PD) products are covered by one or more of the U.S. patents (and any foreign patent
counterparts thereto) identified at Mitel’s website: www.mitel.com/patents.
For more information on the PD patents that are licensed, please refer to www.cmspatents.com.
© Copyright 2024, Mitel Networks Corporation. All Rights Reserved.
MITEL 6940/6940w SIP PHONE
INSTALLATION GUIDE
INSTALLATION GUIDE
A
48V
0.54A
(Optional) To Other
Network Device
To Network
Power Adapter
Connection
Power Adapter
Ethernet Cables
Network Jack
(if inline power provided,
do not install the power adapter)
Other Network Devices
Setup
C
USB Headset Connection (Optional)
30°
60°
60°
30°
B
Stand Attachment

Mitel 6940 Specifications

General

Connectivity	Ethernet
Expansion	Supports expansion modules
Power	Power over Ethernet (PoE)
Ethernet Ports	Dual Gigabit Ethernet ports
Supported Codecs	G.711, G.722, G.729
Headset Port	Dedicated headset port
USB Ports	2 x USB 2.0