Mitox 435 L - Engine Oil; Recommended Oil

435 L/U Brushcutter
18
Original Instructions Version December 12
Engine Oil
This is a 4-stroke engine and is shipped without oil; ll with oil before starting the engine for the
rst time. Failure to ll with oil will cause engine damage and will not be covered by warranty.
Recommended oil
Use 4 stroke oil that meets or exceeds API SG/CF specication.
SAE 10W 30 is recommended for general use.
Preparation
1. Place the engine with the fuel tank side downward and horizontally on a level surface.
2. Remove the oil ller cap.
3. Fill with the oil, insert and remove the oil ller cap/dipstick without screwing it into the oil ller neck,
remove it and check the oil level on the dipstick, ensure the oil is up to the full mark on the dipstick.
4. Ret the oil ller cap securely.
Before Operation - Checking the oil
Always check the oil before use or after every 5 hours if operating continuously.
1. Place the engine with the fuel tank side downward and horizontally on a level surface.
2. Remove the oil ller cap.
3. Insert and remove the oil ller cap/dipstick without screwing it into the oil ller neck, remove it and check
the oil level on the dipstick, ensure the oil is up to the full mark on the dipstick.
4. Ret the oil ller cap securely.