Never hold the Brushcutter in a way in which the cutting head is pointing towards someone else.
Never allow the blades to come into contact with your body.
Always turn o the engine before adjusting the Brushcutter, or at any time when coming into close proximity
with the cutting head.
Always wear thick work gloves when adjusting the Brushcutter.
Safe Handling of Fuel
The engine of the Brushcutter is designed to run on unleaded petrol.
This fuel is highly ammable, never store cans of fuel or rell the fuel tank in any place where there is a source
of heat or re, which might ignite the fuel.
Do not smoke whilst operating the Brushcutter or relling, keep lit cigarettes away from the Brushcutter at all
times.
When relling the fuel tank always stop the engine rst and carefully make sure that there are no sparks or
naked ames anywhere nearby before refuelling.
If any fuel spillage occurs during refuelling, use a dry rag to wipe any fuel which has been spilled onto the
Brushcutter before starting the engine.
After refuelling, screw the fuel cap back tightly onto the fuel tank and carry the brushcutter to a spot 5
metres or more away from where it was refuelled before starting the engine.
To Next Page
Loading...
