Chapter 13 Filter 150
IPv6 / MAC Filter
Rule Index
Select the index number of the filter set from the drop-down list box.
# This is the index number of the rule in a filter set.
Active This field shows whether the rule is activated.
Interface This is the interface that the rule applies to.
Direction The filter set applies to this traffic direction.
ICMPv6 Type The ICMPv6 message type to filter.
Src IP/PrefixLength This displays the source IPv6 address and prefix length.
Dest IP/
PrefixLength
This displays the destination IPv6 address and prefix length.
Mac Address This is the MAC address of the packets being filtered.
Protocol This is the (upper layer) protocol that defines the service to which this rule applies. By
default it is ICMPv6.
Apply Click this to save your changes.
Delete Click this to remove the filter rule selected in the IPv6 / MAC Filter Rule Index field.
Cancel Click this to restore your previously saved settings.
Table 58 Security > Filter > IPv6/MAC Filter (continued)
LABEL DESCRIPTION
To Next Page
Loading...
General